Sand for a 10 × 10 Paver Base
A 10 × 10 ft paver base with a 1 inch leveling-sand bed needs about 17 bags of 50 lb sand — about 0.42 tons (≈ 0.38 tonnes) in bulk.
Adjust the numbers
Pre-filled for a 10 × 10 ft paver base — change the size, depth, or sand type, or switch to metric.
Paver base, sandbox, or fill area
Estimate only. These figures help you plan how much to buy — they are not engineering or structural advice. Actual needs vary with site conditions, waste, and installation method, so order a little extra and confirm final quantities with your supplier or contractor before you buy or start the job.
Other paver base sizes
Frequently asked questions
How much sand do I need for a 10x10 paver patio?
A 10 × 10 ft paver base with a 1 inch leveling-sand bed needs about 0.31 cubic yards of sand — roughly 0.42 tons (≈ 0.38 tonnes), or about 17 bags of 50 lb sand.
How many bags of sand for a 10x10 paver base?
About 17 bags of 50 lb sand. For larger jobs, bulk sand by the ton is usually cheaper than bags.
What kind of sand goes under pavers?
Use paver or leveling sand (coarse, washed) for the bedding layer, then polymeric sand to fill the joints once the pavers are set.